Menene bambancin iko da aikace-aikace tsakanin mahaɗin da toshewar tashar?

Menene bambancin iko da aikace-aikace tsakanin mahaɗin da toshewar tashar?

Wasu masu aiki a masana'antar haɗawa ba za su iya bambance bambancin ra'ayi tsakanin "mai haɗawa" ba, "tashar" da "mai haɗawa", bambancin kewayon mallakar, da bambancin aikace-aikacen aiki. Wannan labarin yana ba ku cikakken gabatarwa game da bambance-bambancen guda uku masu zuwa:

/micro-jack-din41612-connector/

I. Bambancin ra'ayi

1 mai haɗawa, wani ɓangare ne da masu fasaha na injiniyan lantarki ke haɗuwa akai-akai. Na cikin gida wanda kuma aka sani da masu haɗawa, filogi da soket. Gabaɗaya yana nufin masu haɗin lantarki. Na'ura ce da ke haɗa na'urori biyu masu aiki don aika wutar lantarki ko sigina.

Mai haɗawa shine mai haɗa matsayi wanda aka haɗa shi da da'irar lantarki, wanda ya ƙunshi sassa biyu, wato, toshewa da mai haɗawa, wanda za'a iya raba shi gaba ɗaya. Sashe ɗaya na maɓallin da mai haɗawa shine don gane manufar canza da'irar da aka haɗa ta hanyar canza yanayin hulɗar da ke tsakanin ma'auratan.

Tashar 3, wani nau'in kayan haɗi ne da ake amfani da shi don cimma haɗin lantarki, wanda aka raba zuwa nau'in mahaɗi a masana'antu. Ana amfani da tashar don sauƙaƙe haɗin masu jagoranci. A zahiri wani ƙarfe ne da aka rufe a cikin filastik mai rufewa tare da ramuka a ƙarshen biyu kuma ana iya saka shi cikin waya. Ana iya raba tashar zuwa tashar WUK, jerin tashar Turai, jerin tashar plug-in.

II. Bambanci daga ikon dangantawa

Mai Haɗawa 1" = Mai Haɗawa "shine rukuni na farko, tashoshi ɗaya ne kawai daga cikin rukunan" mai haɗawa ". Mai haɗawa shine haɗin da ke tsakanin layi da layi; mai haɗawa shine haɗin da ke tsakanin layi da allo da akwatin. A aikace-aikacen aikace-aikace, sau da yawa ana rarraba shi a matsayin aji.

Tashar 2 wani ɓangare ne na mahaɗin. Haɗaɗɗun kalmomi ne na gabaɗaya, a gaskiya ma, sau da yawa muna ganin mahaɗin, yawanci sun haɗa da harsashi (gidaje) da kuma tashar (tasha) sassa biyu. gidaje galibi filastik ne, suna taka rawa ta kariya, tashar ƙarfe ce, suna taka rawa ta hanyar sadarwa.

3. A fannin wutar lantarki da wutar lantarki:

Masu haɗawa, masu haɗawa, da masu haɗawa iri ɗaya ne. Fahimtar da aka sani ita ce, nau'in kayan aiki, kan namiji, kan mace mai hannu ko juyawa zai iya haɗa abubuwa cikin sauri.

Tashoshin wayoyi, fahimtar da aka sani, nau'in kayan aiki ne, kamar sukrudi, forceps masu danna sanyi don haɗa abubuwa biyu wuri ɗaya, waɗanda galibi ana amfani da su don shigar da wutar lantarki, fitarwa. Sunan Ingilishi Terminal (tashar).

III. Bambanci tsakanin aikace-aikacen da ake amfani da su

Masu haɗin lantarki, waɗanda aka fi sani da masu haɗawa, wani yanki ne na kayan lantarki, waɗanda galibi ake amfani da su a cikin haɗin da ke tsakanin da'irori. A cikin samar da masana'antu, ana iya cewa haɗin layi yana ko'ina, don haka ba shakka ana amfani da haɗin sosai a masana'antu daban-daban.

An raba masu haɗin zuwa nau'uka da yawa, kamar masu haɗin murabba'i, masu haɗin da'ira, masu haɗin tsani da sauransu, layin tashar wayoyi ɗaya ne daga cikin masu haɗin, galibi suna cikin masu haɗin murabba'i. Layin ƙarshe kuma iri ɗaya ne, galibi ana amfani da shi a fagen lantarki da lantarki, ana amfani da shi don allunan da'ira na PCB, allunan da aka buga da kabad ɗin rarrabawa a ciki da wajen layin.

Tsarin amfani da na'urorin yana ƙaruwa, kuma nau'ikan suna ƙaruwa. A halin yanzu, wanda aka fi amfani da shi baya ga na'urorin PCB, akwai na'urorin hardware, na'urorin goro, na'urorin bazara da sauransu, a masana'antar wutar lantarki akwai layin ƙarshe na musamman, akwatin ƙarshe, a sama duk na'urorin wayoyi ne, na'urori masu layi ɗaya, na'urori masu layi biyu, na yanzu, na'urorin lantarki, na yau da kullun, masu karyewa da sauransu.

Gabaɗaya, "mai haɗawa", "mai haɗawa ta tashar" da "mai haɗawa" nau'ikan aikace-aikace ne daban-daban waɗanda suka kasance cikin ra'ayi ɗaya kuma an sanya musu suna bisa ga aikace-aikacen aikace-aikace daban-daban.